LIGHTWEIGHT 6-inch Y-HARNESS
Use to connect two ESCs to one receiver
- Lightweight 28 AWG wire - short leads
- One plug and two sockets
$ 2.99 each
18-inch Y-HARNESS
Use to connect two ESCs to one receiver
- "Standard"-gauge - 26 AWG
- High-quality 30 strand wire
- Gold-plated connectors
- Custom-made for Rabid Models
- 6-inch lead and two 12-inch legs
- One plug and two sockets
$ 4.00 each
30-inch HD Y-HARNESS
Use to connect two ESCs to one receiver
- Heavy-duty - 22 AWG
- High-quality 60 strand wire
- Gold-plated connectors
- Custom-made for Rabid Models
- 6-inch lead and two 24-inch legs
- One plug and two sockets
$ 7.00 each
LIGHTWEIGHT & TINY 3.7gm MICRO SERVO
-Click on picture for larger size-
- PERFECT for our 28" models
- Weighs 3.7gm without wires
- Size: 19 x 8 x 26mm
- Torque: 11.1oz at 6v
- Buy several and SAVE!
$ 7.49 each
20 gauge SILICON WIRE - BY THE FOOT
-Click on picture for larger size-
- High quality silicon insulation
- Fine stranded - 90 strands!
- Superb flexibility - very soft
- 20 gauge - 10-12 amps (10amp ESC)
- Typical price is $3.00 for 3 feet
***RED*** $1.00 per FOOT
Purchase 4 feet for only $3.00
***BLACK*** $1.00 per FOOT
Purchase 4 feet for only $3.00
|
5x3 3-bladed propeller
Works great with our 10-gram brushless motors - Requires 2mm prop adapter or prop saver, not included
- STANDARD rotation (LH)
- 5" diameter, 3" pitch, 3 blades
- Fits 3mm shaft
$1.75 each
5x3 R 3-bladed propeller
Works great with our 10-gram brushless motors - Requires 2mm prop adapter or prop saver, not included
- REVERSE rotation (RH)
- 5" diameter, 3" pitch, 3 blades
- Fits 3mm shaft
$1.75 each
SPIDER WIRE
- For pull-pull control systems
- Braided and Teflon-coated
- 10-pound break strength
- 160" in package
$2.50/pkg
"20-inch" HD Extension
Use to extend servo or ESC wire
- Heavy-duty - 22 AWG wire
- High-quality 60 strand wire
- Gold-plated connectors
- Actual length 500mm (about 19 in)
$ 3.00 each
Large Plywood Motor Mounts
-Click on photo for larger view-
- 3mm / 1/8" thick plywood
- High-quality laser-cut 5-ply
- 2" diameter provides good mounting area
- The 9mm centering hole fits our 24gm motor
- Additional 6mm hole is for wire leads
- TWO pcs per package
$ 2.50/pkg
SETTING THIS PAGE UP WAS HARD
And it took a LOT of time programming the page for all these little items. If that depresses you, and you want to donate a dollar just to make sure
that Marc and Steve can pay for their rabies shots, then click on this next button to add a $1 tip to your bill.
- it's for a really good cause ;-)
- tipping shows you appreciate good service
- actually, we can't believe you read all this
- yes, the buttons below actually work!
- go ahead, do it.
- Which one do you like best?
If a million people click here, just think about all the problems that would be solved. Really!
REALLY ???!!!! Please read our Disclaimer!
|
PAIR of MICRO "deans-type" Connector
-Click on picture for larger size-
- Pair of 2 matching pieces
- Polarized
- Compatible with name-brand plugs
$1.50 PAIR
JST CONNECTOR SET
-Click on picture for larger size-
- Use for battery connector
- Paired-set of two pieces
- one plug and one socket
- with 3" wire leads (approx)
$2.00 PER SET
PROPSAVER for 1.5mm shaft
-Click on picture for larger size-
IPS motors typically use a 3x2 prop (direct drive). Use this propsaver to mount a 4x2.5 prop for better performance!
Or use the propsaver simply to stop breaking props.
- Fits 1.5mm Motor Shaft
- Supplied with one rubber O-ring
- Pictured IPS Motor NOT included
$2.00 EACH
TINY SCREWS for motor mounts
-Click on picture for larger size-
Use four of these screws to mount our brushless motors on a 1/8" firewall.
One set of screws (pictured) will mount two motors.
- EIGHT 5mm screws per bag
- Phillips head, black steel
- Flat head, Self-tapping (sharp)
- 3mm wide head, about 1.5mm thread
LARGE plywood Control Horns
-Click on picture for larger size-
Terrific for large models. Cut slot and insert into 5mm / 1/4" foam. FOUR pcs per pkg
- Laser-cut 5-ply 3mm / 1/8" thick
- Mounting lug 1 1/8" long, 1/4" tall
- 1-inch tall, 3 control holes)
|
